Wheels Mfg Bottom Bracket
Showing all 32 results
- SOLD OUT
Read moreMORE INFOPF30 Adapter for Campagnolo Cranks
SGD 90.00PF30-CAMP adapts Campagnolo Ultra-Torque cranks to PressFit 30-standard frames. This adapter fits over the installed crank bearings so no bearing removal is required for installation. Simply tap the cranks with mounted adapters into the 6806 bearing in the PressFit 30 BB. Tighten cranks to Campagnolo specifications.
- Machined engineering-grade Delrin
- 48g/pr
NOTE:
- PF30 bottom brackets that use a plastic insert that fits into the bearings and covers the outside of the bearings.
- SOLD OUTRead moreMORE INFO
BBright Adapter for 22/24mm Spindle Cranks (SRAM/TruVativ)
SGD 90.00For adapting 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight™ frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD.
- Includes eight 0.7mm shims for fine-tuning chain line
- Machined engineering-grade Delrin
- 48g/pr
- SOLD OUTRead moreMORE INFO
BBright, BB30a & PF30a Adapter for 24mm Spindle Cranks (Shimano, FSA, etc.)
SGD 90.00Adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight™ frames. Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.).
- Includes:
- (4) 0.5mm spindle spacers
- (4) 1.0mm spindle spacers
- (2) 1.0mm thick, 30mm ID spacer
- (1) 2.5mm thick, 30mm ID spacer
- Machined engineering-grade Delrin
- 48g/pr
- Includes:
- SOLD OUTRead moreMORE INFO
T47 Angular Contact BB for 24mm (Shimano) Cranks – Black
SGD 159.00T47 threaded BB cups for T47 frames and 24.00mm spindle diameter cranks. Cups have internal bearings, and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
- BB Cups with bearings
- 2 – Silicone dust seals
- 2 – 0.5mm crank spindle spacers
- 2 – 1.0mm crank spindle spacers
- SOLD OUTRead moreMORE INFO
T47 Outboard Angular Contact BB for 24/22mm (SRAM) Cranks – Black
SGD 159.00T47 threaded BB cups for T47 frames and 22/24mm spindle diameter SRAM GXP cranks. Cups have outboard bearings, and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
- BB Cups with bearings
- 2 – Silicone dust seals
- 2 – 0.5mm crank spindle spacers
- 2 – 1.0mm crank spindle spacers
- 1 – 24mm ID wave washer
- SOLD OUTRead moreMORE INFO
T47 Outboard Angular Contact BB for 24mm (Shimano) Cranks – Black
SGD 159.00T47 threaded BB cups for T47 frames and 24.00mm spindle diameter cranks. Cups have outboard bearings, and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
- BB Cups with bearings
- 2 – Silicone dust seals
- 2 – 0.5mm crank spindle spacers
- 2 – 1.0mm crank spindle spacers
- SOLD OUTRead moreMORE INFO
T47 Angular Contact BB for 30mm Cranks – Black
SGD 159.00T47 threaded BB cups for T47 frames and 30mm diameter spindle cranks. Cups have internal bearings, and can be used in BB shells with widths from 68mm to 132mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
- BB Cups with bearings
- 2 – Silicone dust seals
- 2 – 0.5mm crank spindle spacers
- 2 – 1.0mm crank spindle spacers
- SOLD OUTRead moreMORE INFO
Eccentric BB for PF30 & 24mm (Shimano) Cranks – Black
SGD 185.00Convert your PF30 frame to a single-speed setup with our simple to use eccentric bottom bracket. Enduro Angular Contact sealed bearings. Double lip seals on all bearings with high fill rate top quality grease for maximum durability. Machined aluminum cups are superior in function and durability to plastic. Fully serviceable.
- SOLD OUTRead moreMORE INFO
BBRight™ Outboard Angular Contact BB for 24/22mm (SRAM) Cranks – Black
SGD 155.00Thread together bottom bracket for frames using the BBRight™ bottom bracket standard. Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Bottom Bracket Includes:
- BB Cups with bearings
- 2 – Silicone dust seals
- 2 – 0.5mm crank spindle spacers
- 2 – 1.0mm crank spindle spacers
- 2 – 46mm x 1.0mm cup spacers
- 1 – 46mm x 2.5mm cup spacer
- 1 – wave washer
- SOLD OUTRead moreMORE INFO
BBRight™ Outboard ZERØ Ceramic BB for 24mm (Shimano) Cranks – Black
SGD 265.00Thread together bottom bracket for frames using the BBRight™ bottom bracket standard. Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Bottom Bracket Includes:
- BB Cups with bearings
- 2 – Silicone dust seals
- 2 – 0.5mm crank spindle spacers
- 2 – 1.0mm crank spindle spacers
- SOLD OUTRead moreMORE INFO
BBRight™ Outboard Angular Contact BB for 24mm (Shimano) Cranks – Black
SGD 155.00Thread together bottom bracket for frames using the BBRight™ bottom bracket standard. Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Bottom Bracket Includes:
- BB Cups with bearings
- 2 – Silicone dust seals
- 2 – 0.5mm crank spindle spacers
- 2 – 1.0mm crank spindle spacers
- SOLD OUTRead moreMORE INFO
PF30 Threaded ZERØ Ceramic BB (Black)
SGD 265.00Our best solution for replacing OEM PF30 bottom brackets or for new bike builds. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
- SOLD OUTRead moreMORE INFO
PF30 ZERØ Ceramic BB (Red)
SGD 200.00Our original PF30 bottom bracket is a significant upgrade to any OEM PF30 bottom bracket. Two machined aluminum cups with replaceable bearings offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance.This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Specifically designed for installing 30mm spindle diameter cranks in PF30 (46mm ID BB shell) frames without the need for any adapters.
Bottom Bracket Includes:
- BB Cups with bearings
- 2 – Silicone dust seals
- 2 – 0.5mm crank spindle spacers
- 2 – 1.0mm crank spindle spacers
- SOLD OUTRead moreMORE INFO
BB30 Outboard ABEC-3 BB for 24/22mm Cranks (SRAM) – Black
SGD 120.00Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Specifically designed for installing 22mm/24mm spindle diameter cranks (SRAM / Truvativ GXP) in BB30 (42mm ID BB shell) frames without the need for any adapters.
- SOLD OUTRead moreMORE INFO
BB30 Outboard Angular Contact BB for 24mm Cranks (Shimano) – Black
SGD 160.00Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Specifically designed for installing 24.00mm spindle diameter cranks (Shimano, Etc.) in BB30 (42mm ID BB shell) frames without the need for any adapters.
Note: FSA MegaExo spindles can be between 24.00mm and 24.07mm in diameter. If your FSA spindle is 24.07mm, this BB will not work! You will need to swap the bearings with our FSA 24.07×37 ceramic hybrid bearings.
- SOLD OUTRead moreMORE INFO
BB30 Outboard ABEC-3 BB for 24mm Cranks (Shimano) – Black
SGD 120.00Two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Specifically designed for installing 24.00mm spindle diameter cranks (Shimano, Etc.) in BB30 (42mm ID BB shell) frames without the need for any adapters.
Note: FSA MegaExo spindles can be between 24.00mm and 24.07mm in diameter. If your FSA spindle is 24.07mm, this BB will not work! You will need to swap the bearings with our FSA 24.07×37 ceramic hybrid bearings.
- SOLD OUTRead moreMORE INFO
PF30A Outboard Angular Contact BB for 22/24mm Cranks (SRAM) – Black
SGD 160.00The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Specifically designed for installing 22mm / 24mm spindle diameter cranks (SRAM / Truvativ GXP) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters.
- SOLD OUTRead moreMORE INFO
PF30A Outboard ABEC-3 BB for 24mm Cranks (Shimano) – Black
SGD 120.00The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
Specifically designed for installing 24.00mm spindle diameter cranks (Shimano, Etc.) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters.
Note: FSA MegaExo spindles can be between 24.00mm and 24.07mm in diameter. If your FSA spindle is 24.07mm, this BB will not work! Please purchase our FSA 24.07×37 ceramic hybrid bearings separately.
- SOLD OUTRead moreMORE INFO
BB86/92 Thread Together Angular Contact BB for 24/22mm (SRAM) Cranks – Black
SGD 155.00Threaded BB for BB86, BB92 and PF90 frames and 22/24mm diameter spindle (GXP) cranks. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance.
No more creaking. Smooth operation. Fast bearing replacement.
- SOLD OUTRead moreMORE INFO
BB86/92 Thread Together ZERØ Ceramic BB for 24mm (Shimano) Cranks – Black
SGD 180.00Threaded BB for BB86, BB92 and PF90 frames and 24mm diameter spindle cranks. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance.
No more creaking. Smooth operation. Fast bearing replacement.
- SOLD OUTRead moreMORE INFO
BB86/92 ZERØ Ceramic BB for 24mm (Shimano) Cranks – Red
SGD 180.00Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
- SOLD OUTRead moreMORE INFO
BB86/92 Angular Contact BB for 24mm (Shimano) Cranks – Red
SGD 120.00Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement.
